LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> Aviator AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Intake Air, Fuel Charging, And Engine Electronics >> Removal And Installation >> Camshaft Position (CMP) Sensor

Camshaft Position (CMP) Sensor

  1. Disconnect the battery ground cable.
  2. Remove the engine appearance cover.
  3. Remove the power steering reservoir and bracket. For additional information, refer to STEERING SYSTEM article.
  4. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Removing Camshaft Position (CMP) Sensor
    G03264941Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals