Programming Seat Positions
- A position setting may be recalled if the vehicle is in PARK or NEUTRAL and the ignition switch is not in the START position. After the DSM has initiated the recall, starting the engine or shifting out of PARK or NEUTRAL will not interrupt the process. The driver must move the seat to the desired position using the driver seat switch assembly. The driver must then depress the memory SET switch which activates the memory SET switch light emitting diode (LED). Within five seconds (before the LED goes out), the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing memory switch 2. Memory 3 is selected by depressing both memory switch 1 and memory switch 2 simultaneously.
- If no memory switch input is received within the five second time limit, the operation is aborted and the memory SET switch LED is turned off. If one of the following inputs is received during the five second programming limit, the operation is aborted and the memory SET switch LED is turned off:
- Power driver seat switch
- Power outside rear view mirror switch
- Memory SET switch
- Power adjustable pedal switch