LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2003 >> Navigator 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Control-Traction Control & Stability Assist >> Removal And Installation >> Front Wheel Speed Sensor >> Removal and Installation

Removal and Installation

  1. Disconnect the front anti-lock brake sensor electrical connector.
    Fig 1: Disconnecting Front Anti-Lock Brake Sensor Electrical Connector
    G01561374Courtesy of FORD MOTOR CO.
  2. Separate the sensor cable from the clips.
    Fig 2: Separating Sensor Cable From Clips
    G01561375Courtesy of FORD MOTOR CO.
  3. Remove the bolt and the front wheel speed sensor.
    Fig 3: Removing Bolt And Front Wheel Speed Sensor
    G01561376Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals