LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2003 >> LS 3.0 S >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Cylinder Block Core Plug Replacement >> Material

Cylinder Block Core Plug Replacement: Material

MATERIAL SPECIFICATION CHART

Item Specification
Threadlock(R) 262 E2FZ-19554-B or equivalent WSK-M2G351-A6
  1. Use a slide hammer or tools suitable to remove the cylinder block core plug.
    Fig 1: Removing Cylinder Block Core Plug
    G03590426Courtesy of FORD MOTOR CO.
  2. Inspect the cylinder block plug bore for any damage that would interfere with the correct sealing of the plug. If the cylinder block plug bore is damaged, bore for the next oversize plug.
    3. NOTE: Oversize plugs are identified by the OS stamped in the flat located on the cup side of the plug.
  3. Coat the cylinder block core plug and bore lightly with Threadlock(R) 262 and install the cylinder block core plug.
scientia non olet · About LEMON Manuals