OSC Command Values
WARNING: This page is about a different car, the 2004 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- 00 - sets EPC pressure to 00 kPa (00 psi).
- 15 - sets EPC pressure to 103 kPa (15 psi).
- 30 - sets EPC pressure to 206 kPa (30 psi).
- 45 - sets EPC pressure to 310 kPa (45 psi).
- 60 - sets EPC pressure to 411 kPa (60 psi).
- 75 - sets EPC pressure to 517 kPa (75 psi).
- 90 - sets EPC pressure to 620 kPa (90 psi).
- XXX - cancels OSC value sent.
- SEND - sends the values to PCM.
DRIVE MODE Procedure for EPC.
Follow operating instructions from the scan tool menu screen.
- Select "Output State Control."
- Select "Trans - Drive Mode."
- Select "PIDs" to be monitored.
- Monitor all selected PIDs during test.
- Select "Parameters - EPC."
- Select Value "0-620 kPa (0-90 psi)."
- Press "SEND" to send command.
- Re-Select Value "0-620 kPa (0-90 psi)."
- Press "SEND" to send command.
- Select "XXX" to cancel at any time.
- Press "SEND."