General Specifications
WARNING: This page is about a different car, the 2002 Ford Pickup and 2001 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Steering Wheel Turning Effort | 2.72 Kg (6.0 Lb) |
| Steering Wheel Free Play | 3 mm (0.12 in.) |
| Steering Gear | |
| Type | XR50 (QSC) Recirculating Ball |
| Ratio | 14:1 |
| Steering Gear Turns (Stop-to-Stop) | 3.4 |
| Maximum Worm Bearing Preload (For Inspection Purposes Only) | 0.9 Nm (8 Lb/In) |
| Total Meshload over Worm Bearing Preload over Ends (For Inspection Purposes Only) | 0.23-0.80 Nm (2-7 Lb/In) |
| Steering Pump | |
| Type | CIII |
| Flow Rate @ 74°-80°C (165°-175°F) and Engine Speed Set at 1500 RPM | 10.6-12 liters/Minute (2.8-3.2 gpm) |
| Maximum Pressure @ 74°-80°C (165°-175°F) and Engine Speed Set at 1500 RPM | 1034 kPa (150 psi) |
| Minimum Flow Rate @ 74°-80°C (165°-175°F) Power Steering Analyzer Set at 5,102 kPa (750 psi) and Engine Speed Set at Idle | 5.3 Liters/Minute (1.4 gpm) |
| Relief Pressure | 8965-9862 kPa (1300-1400 psi) |
| Lubricants | |
| MERCON® Multi-Purpose ATF XT-2-QDX | MERCON® |