LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2003 >> Aviator AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Starting System) >> Component Tests >> Starter Relay

Starter Relay

WARNING: This page is about a different car, the 2004 Lincoln Town Car and 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove starter relay from battery junction box. Battery junction box is located on right side of engine compartment. Check relay continuity. Continuity should exist between relay terminals No. 85 and 86, and between relay terminals No. 30 and 87a. See Fig 1 . Continuity should not exist between relay terminals No. 30 and 87. If continuity is as specified, go to next step. If continuity is not as specified, replace relay.
  2. Using a jumper wire, apply battery voltage to relay terminal No. 85. Using a second jumper wire, ground relay terminal No. 86. Continuity should now exist between relay terminals No. 30 and 87. If continuity is not as specified, replace relay. If continuity is as specified, relay is okay at this time.
Fig 1: Identifying Starter Relay Terminals
G97D28186Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals