LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2002 >> LS 3.9 A >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Transaxle Support Insulator - Rear >> Installation

Transaxle Support Insulator - Rear: Installation

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The transaxle may have to be lowered to gain clearance to install the insulator.
  1. Install the lower rear transaxle support insulator.
    1. Install the insulator.
    2. Install the through bolt.
      Fig 1: Installing Through Bolt
      G03412294Courtesy of FORD MOTOR CO.
  2. Install the lower rear transaxle support insulator mount nuts.
    Fig 2: Installing Lower Rear Transaxle Support Insulator Mount Nuts
    G03412295Courtesy of FORD MOTOR CO.
  3. Remove the jack.
scientia non olet · About LEMON Manuals