LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2002 >> Continental >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle External Controls >> Removal And Installation >> Cable and Bracket - Shift, Column >> Installation

Cable and Bracket - Shift, Column: Installation

  1. From the engine compartment, feed the plastic terminal end of the cable through the opening in the dash panel.
  2. Press the rubber boot on the shift cable into the dash panel.
  3. From the engine compartment, install the shift cable into the transmission shift cable bracket on the transaxle and make sure the locking tab is in proper location.
  4. Place the shift cable and the bracket on the manual control lever and install nut.
  5. From the passenger compartment, install the cable-to-steering column shift cable bracket and make sure the locking tab is in proper location.
  6. Snap the cable plastic terminal to the shift control selector lever pivot ball on the steering column.
  7. To adjust the shift cable; see CABLE ADJUSTMENT - SHIFT CONTROL, COLUMN SHIFT .
scientia non olet · About LEMON Manuals