LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2002 >> Continental >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod-Bend

Connecting Rod-Bend

  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • See SPECIFICATIONS .
    • If out of specification, install new components as necessary. See PISTON for the procedure.
      Fig 1: Checking Connecting Rod For Bend
      G01312731Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals