Power Door Lock Control Switch
NOTE:
Some door lock/unlock switches contain diodes. Always reverse test leads and retest before condemning any switch.
Remove suspect door lock control switch. Measure resistance between door lock control switch terminals with switch in specified position. See POWER DOOR LOCK CONTROL SWITCH CONTINUITY TEST table. If continuity does not exist as specified, replace switch.
POWER DOOR LOCK CONTROL SWITCH CONTINUITY TEST
| Terminals | Switch Position | Continuity |
|---|---|---|
| 1 & 4 | ||
| Lock | Yes | |
| Unlock | No | |
| Neutral | No | |
| 2 & 4 | ||
| Lock | No | |
| Unlock | Yes | |
| Neutral | No | |