Steering Column Switches DTCS
FRONT ELECTRONIC MODULE (FEM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | ECU Defective | Using NGS tester, retrieve and document all continuous DTCs. Perform Front Electronic Module (FEM) self-test. If DTC B1342 is retrieved again, replace FEM. See FRONT ELECTRONIC MODULE |
INSTRUMENT CLUSTER MODULE (ICM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1205 | Instrument Cluster Switch 1 Assembly Circuit Failure | Replace instrument cluster. |
| B1209 | Instrument Cluster Switch 2 Assembly Circuit Failure | Replace instrument cluster |
| B1342 | ECU Defective | Using NGS tester, retrieve and record all continuous DTCs. Perform Instrument Cluster Module (ICM) self-test. If DTC B1342 still exists, replace ICM. See INSTRUMENT CLUSTER MODULE . |
| B2328 | Column Reach Feedback Potentiometer Circuit Failure | If DTCs B2328 and B2332 both exist, perform, Test M If only DTC B2328 exists, perform, Test J |
| B2332 | Column Tilt Feedback Potentiometer Circuit Failure | If DTCs B2332 exist, perform, Test K |
| B2351 | Steering Column Switch Signal Circuit Failure | L |
| B2477 | Module Configuration Failure | See COMPUTER RELEARN PROCEDURES If module was configured correctly, replace instrument cluster and repeat self-test. See INSTRUMENT CLUSTER MODULE (ICM) . |
REAR ELECTRONIC MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | ECU Defective | Using NGS tester, clear and document all DTCs. Perform Rear Electronic Module (REM) self-test. If DTC B1342 is retrieved again, replace REM. See REAR ELECTRONIC MODULE . |
STEERING COLUMN LOCK MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | ECU Defective | Using NGS tester, retrieve and document all continuous DTCs. Perform Steering Column Lock Module (SCLM) self-test. If DTC B1342 is retrieved again, replace SCLM. See STEERING COLUMN LOCK MODULE . |
| B2162 | Data Mismatched Number 2 | Perform Steering Column Lock Module (SCLM) parameter reset. See STEERING COLUMN LOCK MODULE PARAMETER RESET . |
| B2168 | Unable To Confirm Unlock Condition | H |
| B2169 | Unable To Confirm Lock Condition | H |
| B2170 | Steering Column Lock Switch Circuit Failure | See STEERING COLUMN LOCK MODULE . |