Visual Inspection
- Ensure master cylinder reservoir is full and parking brake is fully released. Inspect wheel sensors and brakelines for damage. Inspect wheel bearings for looseness or damage. Repair as necessary.
- Ensure fuse No. 12 (60-amp), located in power distribution box, is okay. Ensure fuse No. 15 (10-amp) and fuse No. 32 (15-amp), located in instrument panel fuse block, are okay. Check ABS warning light bulb.
- Ensure shorting cap in EVAC and fill connector is not loose or missing. Check for damage to wiring harnesses. Check for loose or corroded connectors. Repair as necessary. If problem persists after visual inspection, proceed with self-diagnostics.