Passenger's Seat Control Switch
Remove passenger's seat control switch. Using an ohmmeter, check for continuity between indicated switch terminals with switch in appropriate position. See SEAT CONTROL SWITCH RESISTANCE (PASSENGER'S SEAT) table. See Figure or Fig 1 . Replace passenger's seat control switch if it does not test as specified.
SEAT CONTROL SWITCH RESISTANCE (PASSENGER'S SEAT)
| Switch Position | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| Neutral | ||||
| Except Executive Model | 7 & All Except 12 | |||
| Executive Model | 5 & All Except 8 | |||
| Front Up | ||||
| Except Executive Model | 1 & 7 | |||
| Executive Model | 2 & 8 | |||
| Front Down | ||||
| Except Executive Model | 2 & 7 | |||
| Executive Model | 3 & 8 | |||
| Rear Up | ||||
| Except Executive Model | 7 & 11 | |||
| Executive Model | 4 & 8 | |||
| Rear Down | ||||
| Except Executive Model | 6 & 7 | |||
| Executive Model | 1 & 8 | |||
| Seat FWD | ||||
| Except Executive Model | 7 & 8 | |||
| Executive Model | 6 & 8 | |||
| Seat RWD | ||||
| Except Executive Model | 7 & 10 | |||
| Executive Model | 7 & 8 | |||
| Seat Recline FWD (1) | 5 & 7 | |||
| Seat Recline RWD (1) | 4 & 7 | |||
|
||||