Passenger's Seat Control Switch
Remove passenger's seat control switch. Using an ohmmeter, check for continuity between indicated switch terminals with switch in appropriate position. See PASSENGER'S SEAT CONTROL SWITCH TESTING table. See Figure or Figure . Replace passenger's seat control switch if it does not test as specified.
PASSENGER'S SEAT CONTROL SWITCH TESTING
| Switch Position | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| Neutral | ||||
| Except Executive Model | 12 & All Except 7 | |||
| Executive Model | 5 & All Except 8 | |||
| Front Up | ||||
| Except Executive Model | 1 & 7 | |||
| Executive Model | 2 & 8 | |||
| Front Down | ||||
| Except Executive Model | 2 & 7 | |||
| Executive Model | 3 & 8 | |||
| Rear Up | ||||
| Except Executive Model | 7 & 11 | |||
| Executive Model | 4 & 8 | |||
| Rear Down | ||||
| Except Executive Model | 6 & 7 | |||
| Executive Model | 3 & 8 | |||
| Seat Forward | ||||
| Except Executive Model | 7 & 8 | |||
| Executive Model | 6 & 8 | |||
| Seat Rearward | ||||
| Except Executive Model | 7 & 10 | |||
| Executive Model | 7 & 8 | |||
| Seat Recline Forward (1) | 5 & 7 | |||
| Seat Recline Rearward (1) | 4 & 7 | |||
|
||||