Park System: Installation

WARNING: This page is about a different car, the 2002 Lincoln Navigator and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the park gear replacement is required; refer to OUTPUT SHAFT - CHECK in this article.

Fig 1: Installing Park Pawl, Shaft & Return Spring

Courtesy of FORD MOTOR CO.

Install the park pawl shaft.
1. Install the park pawl shaft.
2. Install the park pawl.
3. Install the park pawl return spring.
Install the parking rod guide plate.
1. Install the parking rod guide plate.
2. Install the bolts.
Fig 2: Installing Parking Rod Guide Plate & Bolts
Courtesy of FORD MOTOR CO.
Install the extension housing gasket and the extension housing.