Digital Transmission Range Sensor
WARNING: This page is about a different car, the 2002 Lincoln Navigator and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- Place transmission in Neutral. Raise and support vehicle. Disconnect manual shift cable from Digital Transmission Range (DTR) sensor control lever. DTR is located on left side of transmission. Loosen 2 DTR sensor bolts. Install DTR Sensor Aligner (T97L-70010-A).
- Tighten DTR sensor bolts to specification. See TORQUE SPECIFICATIONS . Connect manual shift cable. Lower vehicle and check system operation.