Connecting Rod - Bend

WARNING: This page is about a different car, the 2004 Lincoln Navigator and 2004 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
- Refer to the appropriate article in ENGINES for the procedure.
- If out of specification, install new components as necessary. Refer to the appropriate article in ENGINES for the procedure.
Fig 1: Measuring Connecting Rod Bend On Alignment Fixture
Courtesy of FORD MOTOR CO.