LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2000 >> LS 3.0 S, Automatic >> Repair and Diagnosis >> Steering >> Steering Columns >> Disabling & Activating Air Bag System >> Activating System

Activating System

  1. Ensure both battery cables are disconnected. Wait one minute. Remove air bag simulators from driver-side air bag, passenger-side air bag and side air bag wiring harness connectors.
  2. Reconnect driver-side air bag connector to air bag module. Install driver-side air bag module on steering wheel. Tighten nut and washer assemblies to specification. See TORQUE SPECIFICATIONS  .
  3. Reconnect passenger-side air bag connector to air bag module. Install passenger-side air bag module. Tighten bolts to specification. Install trim panel. Connect positive battery cable. Connect negative battery cable. Check AIR BAG light for system faults.
scientia non olet · About LEMON Manuals