Seat Control Switch
Remove seat control switch. Using an ohmmeter, check resistance between terminals. See SEAT CONTROL SWITCH RESISTANCE table. See Fig 1 . If resistances are not as specified, replace seat control switch.
SEAT CONTROL SWITCH RESISTANCE
| Switch Position | Between Terminals No. | Resistance In Ohms |
|---|---|---|
| Front Up | 4 & 6 | Less Than 5 |
| Front Down | 6 & 9 | Less Than 5 |
| Rear Up | 3 & 6 | Less Than 5 |
| Rear Down | 6 & 8 | Less Than 5 |
| Seat FWD | 2 & 6 | Less Than 5 |
| Seat RWD | 6 & 7 | Less Than 5 |
| Seat Up | 3 & 6; 4 & 6 | Less Than 5 |
| Seat Down | 6 & 9; 6 & 8 | Less Than 5 |
| Recline FWD | 5 & 6 | Less Than 5 |
| Recline RWD | 6 & 10 | Less Than 5 |