Driver's Seat Control Switch (Without Memory)
Remove driver's seat control switch. Using an ohmmeter, check for continuity between indicated switch terminals with switch in appropriate position. See 1999 MODELS DRIVER'S SEAT CONTROL SWITCH RESISTANCE (WITHOUT MEMORY) or 2000 MODELS DRIVER'S SEAT CONTROL SWITCH RESISTANCE (WITHOUT MEMORY) table. See Fig 1 or Fig 2 . Replace driver's seat control switch if it does not test as specified.
1999 MODELS DRIVER'S SEAT CONTROL SWITCH RESISTANCE (WITHOUT MEMORY)
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & All, Except 3 |
| Front Up | 3 & 7 |
| Front Down | 3 & 5 |
| Rear Up | 3 & 4 |
| Rear Down | 3 & 6 |
| Seat FWD | 2 & 3 |
| Seat RWD | 3 & 8 |
Fig 1: Identifying Driver's Seat Control Switch Terminals (1999 Models Without Memory) & Passenger's Seat Control Switch Terminals (Executive Model)
2000 MODELS DRIVER'S SEAT CONTROL SWITCH RESISTANCE (WITHOUT MEMORY)
| Switch Position | Continuity Between Terminals No. |
| Neutral | 1 & All, Except 7 |
| Front Up | 7 & 6 |
| Front Down | 7 &11 |
| Rear Up | 7 & 2 |
| Rear Down | 7 & 1 |
| Seat FWD | 7 & 5 |
| Seat RWD | 7 & 4 |