LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1999 >> Continental >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - Generators & Regulators >> System Tests >> Test E

Test E

  1. With ignition on, engine off, measure voltage between generator terminal B+ (Black/Orange wire) and ground. If battery voltage is present, go to next step. If battery voltage is not present, repair Black/Orange wire and check system operation. See WIRING DIAGRAMS .
  2. Disconnect generator 3-pin connector and inspect for damaged, loose or corroded terminals. Repair connector as necessary. If connector is okay, perform GENERATOR LOAD TEST  and GENERATOR NO-LOAD TEST  under ON-VEHICLE TESTING. Replace as necessary and check system operation.
scientia non olet · About LEMON Manuals