Mirror Control Switch
Using an ohmmeter, check for continuity between indicated switch connector terminals when switch is activated as specified. See POWER MIRROR SWITCH TERMINAL IDENTIFICATION table. See Fig 1 . Replace switch if it does not test as specified.
POWER MIRROR SWITCH TERMINAL IDENTIFICATION
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 3 & 9; 4 & 7 | |
| Down | 3 & 4; 7 & 9 | |
| Left | 1 & 3; 4 & 7 | |
| Right | 1 & 7; 3 & 4 | |
| Right Mirror | ||
| Up | 3 & 8; 4 & 7 | |
| Down | 3 & 4; 7 & 8 | |
| Left | 2 & 3; 4 & 7 | |
| Right | 2 & 7; 3 & 4 | |