LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1997 >> Mark VIII Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> A/C-Heater System >> A/C System Specifications

A/C System Specifications

WARNING: To avoid injury from accidental air bag deployment, read and follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM procedures in the AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section.
A/C SYSTEM SPECIFICATIONS

Application Specification
Compressor Type Ford FS-10 10-Cyl.
Compressor Belt Tension (1)
System Oil Capacity (2) 7.0 ozs.
Refrigerant (R-134a) Capacity 33-35 ozs.
System Operating Pressures (3)
High Side 125-230 psi (8.8-16.2 kg/cm2 )
Low Side 25-45 psi (1.8-3.2 kg/cm2 )
(1) Serpentine belt tension is automatically adjusted by tensioner pulley.
(2) Use YN-12b PAG Oil (Part No. F2AZ-19577-AB).
(3) Specification is with ambient temp. at 80°F (27°C), relative humidity at 50-70 percent, and engine speed at 1500 RPM.
scientia non olet · About LEMON Manuals