Description & Operation

The 8-way power seats provide horizontal, vertical, tilt, lumbar support and recline adjustments. Seat adjustments can be made by operating function switches. Function switches are located on side of the seat.

Memory seat allows driver to program 2 seat positions into seat memory. Seat will automatically move to position indicated by pressing button or combination of buttons on switch. Position can only be recalled when transmission is in PARK or NEUTRAL position.

Auto-glide feature automatically moves the seat forward or backward when the seatback is tilted forward or backward. This feature allows easy access to the rear seat. This feature will operate only if transmission is in PARK or NEUTRAL position. Passenger seat auto-glide will only operate if ignition switch is in ACC or RUN position.

Easy Access/Easy Out feature moves driver seat back two inches when key is remove from ignition. When driver door is open then closed and ignition switch is turned on, driver seat is returned to original position.

Power Lumbar Support is controlled by a separate switch, allowing compressor assembly to inflate or deflate an air bladder as desired.

The 8-way power seat are interconnect through the module communication network. The following modules assist in operating both power seats:

• Driver Seat Module (DSM), located under driver's seat.
• Passenger Seat Module (PSM), located under passenger's seat.
• Driver Door Module (DDM), locate in left front door.
• Steering Column/Ignition/Lighting (SCIL) control module, located behind passenger's side of instrument panel, to right of glove box.