Test G: Right Mirror Inoperative
- Turn ignition on. Connect New Generation Star (NGS) tester to Data Link Connector (DLC). Set NGS tester to DDM PID MIR_SEL. Move mirror switch to R (right) position. Use mirror control switch to tilt mirror up. If PID MIR_SEL reads PSSNGR, go to step 3). If PID MIR_SEL does not read PSSNGR, go to next step.
- Turn ignition on. Disconnect DDM connector C456. Check voltage between connector C456 terminal No. 20 (Purple/Orange wire) and terminal No. 10 (Yellow/Black wire). Move mirror switch to R (right) position. Use mirror control switch to tilt mirror up. If battery voltage exists, replace DDM and retest. If battery voltage does not exist, replace mirror switch and retest.
- Reconnect DDM connector C456. Turn ignition on. Perform DSM Self Test. If DTC U1180, U1181 or U1194 exist, see the SEATS - POWER article. If DTC U1180, U1181 or U1194 do not exist, replace DSM and retest.