Master Switch
Remove master power window switch. See MASTER SWITCH under REMOVAL & INSTALLATION. Connect one lead of an ohmmeter or the ground lead of a self-powered test light to pin No. 3 of power window master switch. See Fig 1 . Check appropriate pins for continuity when switch is actuated as indicated. See the MASTER POWER WINDOW SWITCH TEST table below. If continuity is not as specified, replace master power window switch and retest system.
MASTER POWER WINDOW SWITCH TEST
| Switch Position | Continuity Between Pins | |
|---|---|---|
| Left Front Window | ||
| Down | 2 & 4 | |
| Up | 2 & 5 | |
| Left Rear Window | ||
| Down | 2 & 8 | |
| Up | 2 & 9 | |
| Right Front Window | ||
| Down | 2 & 6 | |
| Up | 2 & 7 | |
| Right Rear Window | ||
| Down | 2 & 10 | |
| Up | 2 & 11 | |
| Power Window Lockout | ||
| Toward Door (Lock) | 1 & 2 | |
| Away From Door (Unlock) | No Continuity | |