Pinpoint Testing: Notes
NOTE:
See appropriate ANTI-THEFT DIAGNOSIS CHART
under TESTING to determine testing according to vehicle system problem.
Before performing any tests on anti-theft system, check the following items to eliminate common problems:
- Hood/trunk/liftgate properly aligned.
- Door locks not binding.
- Fuses not blown.
- Loose or corroded connections.
- Damaged wiring harness.
- Damaged Central Processing Unit (CPU).
- Horn, headlights, hazard flashers, interior lights, trunk lights, power door locks and remote entry systems operational.
ANTI-THEFT MODULE CONNECTOR CIRCUITS
| Pin No. | Circuit (Color) | Function |
|---|---|---|
| 1 | 931 (O) | Battery Power |
| 2 | Not Used | Not Used |
| 3 | 627 (BK/O) | Door Ajar Switches |
| 4 | 296 (W/P) | Ignition Switch Input |
| 5 | 26 (W/P) | Trunk/Hood Tamper Switches |
| 6 | 25 (DG/P) | Door Disarm Switches |
| 7 | 118 (PK/O) | Unlock All Doors |
| 8 | 163 (R/O) | Unlock Driver Door |
| 9 | 117 (PK/BK) | Lock All Doors |
| 10 | 936 (DG/W) | Ignition Key Sensor |
| 11 | 342 (LG/P) | Starter Interrupt |
| 12 | Not Used | Not Used |
| 13 | Not Used | Not Used |
| 14 | Not Used | Not Used |
| 15 | 343 (DB/LG) | Alarm Indicator Light |
| 16 | Not Used | Not Used |
| 17 | Not Used | Not Used |
| 18 | 6 (Y/LG) | Horn Relay Output |
| 19 | Not Used | Not Used |
| 20 | Not Used | Not Used |
| 21 | 218 (W/P) | Exterior Lights Output |
| 22 | Not Used | Not Used |
| 23 | 359 (GY/R) | Ground |
| 24 | Not Used | Not Used |
| 25 | Not Used | Not Used |
| 26 | 57 (BK) | Ground |