Side Mirror Motor
Remove door trim panel. Disconnect mirror motor connector from mirror switch harness. Using 2 jumper wires, connect battery voltage and chassis ground to specified wire terminals. See appropriate SIDE MIRROR MOTOR TEST table. Observe mirror for proper movement. If mirror motor fails any portion of test, replace mirror assembly.
SIDE MIRROR MOTOR TEST (1)
| Mirror Movement | Battery Voltage | Ground | |||
|---|---|---|---|---|---|
| Left Mirror | |||||
| Up | DK BLU | YEL | |||
| Down | YEL | DK BLU | |||
| Left | RED | YEL | |||
| Right | YEL | RED | |||
| Right Mirror | |||||
| Up | PPL | YEL | |||
| Down | YEL | PPL | |||
| Left | DK GRN | YEL | |||
| Right | YEL | DK GRN | |||
|
|||||