Terminal Identification

NOTE: Tests require Breakout Box (014-00322) and ABS Adapter (T90P-50-ALA). See Figure for WARNING LIGHT SYMPTOM SEQUENCE CHART. See Fig 1 -13 for pin locations and circuit identification.

Fig 1: 19-Pin Valve Body Connector Terminal ID

Courtesy of FORD MOTOR CO.

Fig 2: Wheel Speed Sensor Connector ID

Courtesy of FORD MOTOR CO.

Fig 3: Fluid Level Sensor Connector (HCU Reservoir) ID

Courtesy of FORD MOTOR CO.

Fig 4: Pedal Travel Switch Connector ID

Courtesy of FORD MOTOR CO.

Fig 5: Pump Motor Connector Terminal ID

Courtesy of FORD MOTOR CO.

Fig 6: Pump Motor Relay Connector Terminals (Harness Side) ID

Courtesy of FORD MOTOR CO.

Fig 7: Main Power Relay Terminal ID

Courtesy of FORD MOTOR CO.

Fig 8: Fluid Level Sensor Connector Terminal ID

Courtesy of FORD MOTOR CO.