LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1992 >> Mark VII LSC >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position Sensor (3.8L) >> Removal & Installation

Removal & Installation

Disconnect negative battery cable. Disconnect camshaft sensor connector. Remove camshaft sensor mounting screws and remove sensor. To install, reverse removal procedure. Tighten camshaft sensor and mounting screws to 22-31 inch lbs. (2.5-3.5 N.m).

scientia non olet · About LEMON Manuals