LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Mark VII LSC >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Cold Enrichment Rod & Control Vacuum Regulator - 5.8L MCU >> CVR Swivel Assembly R & I

CVR Swivel Assembly R & I

  1. Remove "E" clip and hinge pin. Turn CER adjustment nut counterclockwise until nut disengages from rod. Remove CVR and swivel assembly. Replace with new assembly.
    NOTE: Adjustment nut cavities are filled with epoxy after final adjustment. To adjust, the existing parts must be removed and new parts installed. Choke control rod is designed to break. If rod breaks during adjustment, a new rod must be installed.
  2. With control rod in place, install swivel assembly and tighten CER adjustment nut to lower and align position. Connect lever to swivel. Install hinge pin and "E" clip. Perform CER RUN POSITION ADJUSTMENT.
scientia non olet · About LEMON Manuals