LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1990 >> Continental Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> Master Cylinder & HCU

Master Cylinder & HCU

NOTE: If pump motor must be shut off for any reason, press ABORT button.
  1. Unplug ECU connector. Install Anti-Lock Brake Breakout Box/Bleeding Adapter (T90P-50-ALA). Set BLEEDER/HARNESS switch to BLEED position. Set ignition switch to ON position. Red OFF indicator light will glow.
  2. Press MOTOR button on adapter. Pump motor will run. Red indicator light will go out, and Green ON indicator will glow. Pump will run for 60 seconds. If pump motor is to be turned off before 60 seconds has elapsed, press ABORT button.
  3. After pump motor runs for 20 seconds, press and hold VALVE button for 20 seconds, then release. Pump will continue to run for an additional 20 seconds. Brakes can now be bled in the conventional manner using the following sequence: right rear, left front, left rear, and right front.
scientia non olet · About LEMON Manuals