System Operational Check
NOTE:
When cause of system malfunction is unknown, perform the following checkout procedure to isolate problem to a specific condition.
- Ensure that photocell lens of photo amplifier unit is clean and not obstructed. Ensure there is a clean, tight ground connection for circuit No. 57 (Black wire) of potentiometer unit at headlight switch.
- Ensure headlights operate normally with headlight switch. Check that autolamp relay connector is properly attached to relay.
- Place autolamp control switch in OFF position. Turn headlights on using headlight switch. If lights do not operate, check and correct the standard headlight circuit.
- If lights work okay, check autolamp fuse. If fuse is okay, proceed to CIRCUIT TESTS.