LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1981 >> Mark VI Base, 2D Sedan >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiper/Washer Systems >> Adjustment >> Sensor-Amplifier Vertical Aiming

Sensor-Amplifier Vertical Aiming

Sensor Amplifier vertical aiming should be performed with car unloaded, trunk empty, gas tank at least half full, and tire pressure correct. Put car on a level floor and rock vehicle to equalize springs. Adjust vertical aiming screw at rear of the bracket assembly, until the bubble is centered in the level.

NOTE: Do not tamper with the screw at the end of level. Always make final adjustment while turning aiming screw clockwise.
scientia non olet · About LEMON Manuals