Registration [09/2023 - ]: Procedure
- CLEAR ALL DIGITAL KEYS USING MULTI-DISPLAY NOTE:
- Make sure to use the electrical key when turning the ignition switch to ON (IG) and clearing all the digital keys.
- If all digital keys are cleared, both the owner key and share keys are cleared.
HINT:
In this document, an electrical key refers to a registered electrical key transmitter sub-assembly.
Procedure Steps 1. Start of erasure - Turn the ignition switch to ON using electrical key.
- Enter the following multi-display menu:
Settings / Info & Security / Delete the digital keys
2. Confirmation of registered electrical keys - In accordance with the display of the multi-display, touch the electrical key to the power switch.*1
- In accordance with the display of the multi-display, touch the electrical key to the engine switch.*2
- Confirm that the buzzer sounds once (short beep).
3. End of erasure - In accordance with the display of the multi-display, delete all digital keys.
- *1: except Gasoline Model
- *2: for Gasoline Model
- IMMOBILISER SYSTEM (KEY REGISTRATION)
except Gasoline Model: Refer to REGISTRATION [09/2023 - ]
for Gasoline Model: Refer to REGISTRATION [09/2023 - ]