LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Stop And Start System - Diagnostic Codes >> Stop And Start System >> DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U115C-87: Lost Communication with ECM/PCM "A" (ch5) Missing Message; DTC U1170-87: Lost Communication with Brake System Control Module (ch2) Missing Message [09/2023 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

Monitor runs whenever the following DTCs are not stored None
Ignition switch ON
Time after ignition switch is off to ON 3 seconds or more
Battery voltage 10 V or higher
Write Inhibit permit
Time after Write status forbiddance to permit 0.5 seconds or more
Starter Off
Time after starter on to off 0.5 seconds or more