DTC Check / Clear [11/2017 - 03/2019]

DTC CHECK/CLEAR
1. Check for DTCs.
  1. Turn the engine switch off.
  2. Connect the Techstream to the DLC3.
  3. Turn the engine switch on (IG).
  4. Turn the Techstream on.
  5. Read the DTCs following the prompts on the Techstream. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
    Chassis > ABS/VSC/TRAC > Trouble Codes
  6. Check the details of the DTCs.
    Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2017 - 03/2019]
2. Clear the DTCs.
  1. Turn the engine switch off.
  2. Connect the Techstream to the DLC3.
  3. Turn the engine switch on (IG).
  4. Turn the Techstream on.
  5. Operate the Techstream to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
    Chassis > ABS/VSC/TRAC > Clear DTCs
  6. Press the DTC clear button.
END OF DTC CHECK/CLEAR
1. Turn the engine switch on (IG).
2. Check that the ABS warning and slip indicator lights go off within approximately 3 seconds of turning the engine switch on (IG).