LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> LX 600 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (W/ Canister Pump Module) - Diagnostic Codes (2 Of 9) >> SFI SYSTEM (w/ Canister Pump Module) >> DTC P00FE-00: EVAP System Tank Vapor Line Restricted/Blocked [12/2021 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

Atmospheric pressure 70 kPa (abs) [10.15 psi (abs)] or higher, and less than 110 kPa (abs) [15.95 psi (abs)]
Battery voltage 10.5 V or higher
Vehicle speed Less than 4 km/h (2.5 mph)
Ignition switch Off
Time after key-off 5, 7 or 9.5 hours
EVAP pressure sensor malfunction (P0452, P0453) Not detected
Purge VSV Not operated by scan tool
Vent valve Not operated by scan tool
Leak detection pump Not operated by scan tool
Both of the following conditions met before key-off 1 and 2
1. Duration that vehicle is driven 5 minutes or more
2. EVAP purge operation Performed
Engine coolant temperature 4.4°C (40°F) or higher, and less than 35°C (95°F)
Intake air temperature (mass air flow meter sub-assembly) 4.4°C (40°F) or higher, and less than 35°C (95°F)
Fuel level 85% or less
EVAP system No leak during this key-off monitoring
Fuel level sensor malfunction (P0461, P0462, P0463) Not detected
Lost communication with instrument panel cluster control module (U0155) Not detected