Customize Parameters [08/2021 - ]

CUSTOMIZE PRE-COLLISION SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Customizing with the Multi-information Display

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" tab on the multi-information display.

PRE-COLLISION SYSTEM SETTINGS

Display	Description	Setting	Default
PCS	Turns the pre-collision system function on/off.	ON/OFF	ON
Warning sensitivity	Sets the pre-collision system function warning sensitivity	Early/Middle/Late	Middle

Customizing with the Techstream

Select the setting by referring to the table below.

Others

Tester Display	Description	Default	Setting	ECU
PCS Function ON/OFF State Stored	Refer to the table below	Not Stored	$00:Not Stored,$01:Stored	Forward recognition camera
PCS Warning Timing State Stored 1	Refer to the table below	Not Stored	$00:Not Stored,$01:Stored	Forward recognition camera
PCS Warning Timing State Stored 2	Refer to the table below	Stored	$00:Not Stored,$01:Stored	Forward recognition camera
PCS Warning Timing State Stored 3	Refer to the table below	Not Stored	$00:Not Stored,$01:Stored	Forward recognition camera

MEASUREMENT ITEM

Customize Setting	Description	Setting
PCS Function ON/OFF State Stored	Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off.	Not stored: Pre-collision system always turns on Stored: Pre-collision system maintains previous setting
PCS Warning Timing State Stored 1	Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON.	Not stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 2	Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON.	Not stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 3	Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the ignition switch is turned from off to ON.	Not stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value