DTC B2285: Steering Lock Position Signal Circuit Malfunction [09/2022 - ]: Description
| DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Note |
| B2285 |
Steering Lock Position Signal Circuit Malfunction |
This DTC is stored when there is no continuity between terminal SLP of the certification ECU (smart key ECU assembly) and ground. (1-trip detection logic*) |
- Certification ECU (smart key ECU assembly)
- Wire harness or connector
|
DTC Output Confirmation Operation:
- Disconnect the cable from the negative (-) auxiliary battery terminal, wait 30 seconds and then reconnect the cable to the negative (-) auxiliary battery terminal. Wait at least 40 seconds with the power switch off, then turn the power switch on (IG) and wait at least 40 seconds.
|
- *: Only detected while a malfunction is present and the power switch is on (IG).
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED
| Vehicle Condition when Malfunction Detected |
Fail-safe Function when Malfunction Detected |
| The hybrid control system cannot be started. |
The ECU does not send a hybrid control system start request. |
RELATED DATA LIST AND ACTIVE TEST ITEMS
| DTC No. |
Data List and Active Test |
| B2285 |
- |