LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> RX 350h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Stop And Start System Cancel Switch Assembly - Service Information) >> Stop And Start System Cancel Switch Assembly >> Inspection [10/2022 - ] >> Procedure

Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ECO RUN CANCEL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1127841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Eco Run Cancel Switch (Electric Parking Brake Switch Assembly))

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      C29-4 (S) - C29-7 (E) Eco run cancel switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
      Eco run cancel switch (electric parking brake switch assembly) not pushed 10 kΩ or higher

      If the result is not as specified, replace the eco run cancel switch (electric parking brake switch assembly).

scientia non olet · About LEMON Manuals