DTC U0142: Lost Communication with Body Control Module "B"; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0163: Lost Communication with Navigation Control Module [09/2014 - 09/2020]: Procedure

CHECK DTC

Clear the DTCs.
Refer to DTC CHECK / CLEAR [09/2014 - 09/2020]

Body Electrical > Telematics > Clear DTCs

Recheck for DTCs and check if the same DTC is output again.

Body Electrical > Telematics > Trouble Codes

Result

Result	Proceed to
DTCs are output.	A
DTCs are not output.	B

HINT:

If CAN communication system DTCs are stored, they may also be stored for other systems.
If the CAN communication system has been inspected and repaired, these DTCs will not be output when rechecking for DTCs.
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 08/2016] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2016 - 11/2017] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2017 - 03/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2019 - 09/2020]

Result:

Result: