Driver Side Seat Belt Warning Light does not Operate [12/2021 - ]: Procedure
- CHECK DTC OUTPUT (AIRBAG SYSTEM)
- Clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
- Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
Result
Result Proceed to DTCs are not output A DTCs are output B
Result:
B
GO TO AIRBAG SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - ]
Result:
A
See step 2
- Clear the DTCs.
- READ VALUE USING GTS
- Read the Data List according to the display on the GTS.
Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Driver Seat Buckle Switch Status Driver side buckle switch Unknown, Unbuckle, Buckle or Malfunction Unknown: Data is not determined
Unbuckle: Driver side seat belt unbuckle
Buckle: Driver side seat belt buckle
Malfunction: Driver side seat belt buckle circuit malfunction- Body Electrical > SRS Airbag > Data List
Tester Display Driver Seat Buckle Switch Status Result
Result Proceed to Unbuckle or Buckle is displayed on the GTS according to the driver seat belt condition A Unbuckle or Buckle is not displayed correctly on the GTS according to the driver seat belt condition B Malfunction is displayed on the GTS C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - ]
Result:
B
REPLACE FRONT SEAT BELT SET LH. Refer to REMOVAL [12/2021 - ]
Result:
C
REPLACE AIRBAG ECU ASSEMBLY. Refer to REMOVAL [12/2021 - ]
- Read the Data List according to the display on the GTS.