Entry Lock Function does not Operate Using Close & Lock Function [10/2018 - 07/2022]: Procedure
WARNING: This page is about a different car, the 2022 Lexus UX 200, 2021 Lexus UX 200, 2020 Lexus UX 200, and 2019 Lexus UX 200. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPERATION HISTORY
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Smart Access / Utility / Operation History
Body Electrical > Smart Access > Utility
Tester Display Operation History AUTO ENTRY WIRELESS OPERATION HISTORYParameter Name Content Back Door Lock & Close signal Certification ECU (smart key ECU assembly) confirmed the back door lock & close signal. Result
Result Proceed to Not output A "Back Door Lock & Close signal" is output B
Result:
B
GO TO POWER BACK DOOR SYSTEM. Refer to PROBLEM SYMPTOMS TABLE [10/2018 - 07/2022]
Result:
A
See step 2
- CHECK ENTRY BACK DOOR OPEN FUNCTION
- While carrying the electrical key transmitter sub-assembly, check that the entry unlock function operates when the back door opener switch is operated.
Refer to OPERATION CHECK [10/2018 - 08/2021] , or refer to OPERATION CHECK [08/2021 - 07/2022]
Result
Result Proceed to Entry back door open function operates A Entry back door open function does not operate B
Result:
A
GO TO POWER BACK DOOR SYSTEM (Close & Lock Function does not Operate). Refer to Close & Lock Function does not Operate [10/2018 - 07/2022]
Result:
B
GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (Back Door Entry Lock and Unlock Functions do not Operate). Refer to Back Door Entry Lock and Unlock Functions do not Operate [10/2018 - 07/2022]
- While carrying the electrical key transmitter sub-assembly, check that the entry unlock function operates when the back door opener switch is operated.