LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems (Service Information) >> VSC Off Switch >> Inspection [10/2018 - ] >> Procedure

Inspection [10/2018 - ]: Procedure

  1. INSPECT VSC OFF SWITCH 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.
        GTY826677Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (VSC OFF Switch)

        Standard Resistance

        Tester Connection Condition Specified Condition
        2 (+) - 7 (E) Switch pushed Below 1 Ω
        2 (+) - 7 (E) Switch not pushed 10 kΩ or higher

        If the result is not as specified, replace the VSC OFF switch.

    2. Check the illumination.
      1. Apply auxiliary battery voltage to the VSC OFF switch.

        OK

        Condition Specified Condition
        Auxiliary battery positive (+) → 1 (ILL+)
        Auxiliary battery negative (-) → 8 (ILL-)        		 Illuminates

        If the result is not as specified, replace the VSC OFF switch.

scientia non olet · About LEMON Manuals