LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) System (K120) (Diagnostic Codes) (1 Of 2) >> Continuously Variable Transaxle System >> DTC P0710-00: Transmission Fluid Temperature Sensor "A" Circuit Range/Performance [10/2018 - 10/2019] >> Typical Enabling Conditions

Typical Enabling Conditions

ALL

ETC system
(Electronic throttle control system)
Not system down
(MIL illuminated by following codes: P0121, P0122, P0123, P0222, P0223, P0604, P0606, P0607, P060D, P060E, P0657, P0658, P1607, P16B0, P2102, P2103, P2111, P2112, P2119, P2135)
KCS sensor circuit
(Knock sensor)
Not circuit malfunction
(MIL illuminated by following codes: P0327, P0328)
ECT sensor circuit
(Engine coolant temperature sensor)
Not circuit malfunction
(MIL illuminated by following codes: P0117, P0118)
IAT sensor circuit
(Intake air temperature sensor)
Not circuit malfunction
(MIL illuminated by following codes: P0112, P0113)
Transmission fluid temperature sensor "A" circuit
(CVT fluid temperature sensor)
Not circuit malfunction
(MIL illuminated by following codes: P0712, P0713)
Turbine speed sensor "A" circuit
(Transmission revolution sensor (NT))
Not circuit malfunction
(MIL illuminated by following codes: P0717, P07BF, P07C0)
Output speed sensor circuit
(Transmission revolution sensor (NOUT))
Not circuit malfunction
(MIL illuminated by following codes: P0722, P077C, P077D)
Soak timer circuit Not circuit malfunction
(MIL illuminated by following code: P2610)
Low voltage flag OFF
CONDITION (A)

Time after engine start except for continuing shift position "N" or "P"*2 10 min. or more
Accumulated driving time*1 2 min. and 55 sec. or more
Driving distance after engine start*3 5 km (3.1 miles) or more
IAT*4 15°C (59°F) or more
ECT (12 sec. after engine start) 15°C (59°F) or more
Soak time 5 hours or more
CONDITION (B)

Time after engine start except for continuing shift position "N" or "P"*2 18 min. and 20 sec. or more
Accumulated driving time*1 4 min. and 10 sec. or more
Driving distance after engine start*3 7 km (4.4 miles) or more
IAT*4 -10°C (14°F) or more
ECT (12 sec. after engine start) -10°C (14°F) or more
CONDITION (C)

Time after engine start except for continuing shift position "N" or "P"*2 30 min. or more
Accumulated driving time*1 6 min. and 40 sec. or more
Driving distance after engine start*3 16 km (9.9 miles)
IAT*4 -15°C (5°F) or more
ECT (12 sec. after engine start) -15°C (5°F) or more
CONDITION (D)

Time after engine start except for continuing shift position "N" or "P"*2 55 min. or more
Accumulated driving time*1 12 min. and 30 sec. or more
Driving distance after engine start*3 27 km (16.8 miles)
CONDITION (E)

Any of the following conditions is met: -
- Elapsed time for ECT to reach 60°C (140°F) 10 sec. or more
- Soak time 5 hours or more
ECT (12 sec. after engine start) Below 35°C (95°F)

HINT: 

*1: Following conditions are met

Engine speed - Turbine speed -50 rpm or more
Output speed 400 rpm or more
Throttle valve opening angle 3% or more
Shift position Not "N" or "P"
Engine Starting
Accumulated driving time is cleared when following condition met -
Duration time from shift position "N" or "P" 300 sec. or more

*2: Time after engine start is cleared when following condition met

Duration time from shift position "N" or "P" 300 sec. or more

*3: Driving distance is cleared when following condition met

Duration time from shift position "N" or "P" 300 sec. or more

*4: IAT is measured when either of following conditions met

12 sec. after engine start -
Duration time from shift position "N" or "P" 300 sec. or more