Caution / Notice / Hint

NOTE:

Perform the universal trip to clear permanent DTCs.
Refer to DTC CHECK / CLEAR [10/2018 - 07/2022]
Perform registration and/or initialization when parts related to the continuously variable transaxle system are replaced.
Refer to PRECAUTION [10/2018 - 07/2022]
Check that no DTCs are stored after performing initialization.
Refer to DTC CHECK / CLEAR [10/2018 - 07/2022]
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to INITIALIZATION [10/2018 - 07/2022]

HINT:

Read Freeze Frame Data using the Techstream. The TCM records vehicle and driving condition information as Freeze Frame Data the moment a DTC is stored. When troubleshooting, Freeze Frame Data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.