LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Pad Switch >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

  1. REMOVE HORN BUTTON ASSEMBLY 

    Refer to REMOVAL [10/2018 - 07/2022]

  2. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the steering pad switch connector from the spiral cable with sensor sub-assembly.
    2. Remove the 2 screws.
      GTY811164Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Pin
      *b Guide
    3. Disengage the 4 pins, 2 guides and 2 claws to remove the steering pad switch assembly.
scientia non olet · About LEMON Manuals