Customize Parameters [10/2020 - ]

CUSTOMIZE WIPER AND WASHER SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

Customizing with the Techstream

Select the setting by referring to the table below.

Wiper

Tester Display	Description	Default	Setting	ECU
Auto Wiper	Function to enable AUTO wiper operation*1	Avail	0:Avail, 1:Not Avl	Rain Sensor
Rear Wiper Stop in Back Door/Trunk Lid Open	Function to stop rear wiper when back door is opened	Not Available	0:Not Available, 1:Available	Main Body ECU (Multiplex Network Body ECU)
Rear Wiper Washer Function	Function to operate rear wiper when rear washer is used	Available	0:Not Available, 1:Available	Main Body ECU (Multiplex Network Body ECU)
Auto Rear Wiper in Reverse Setting	Function to operate rear wiper when shifting to R	Once	00:Not Available, 10:Once, 11:Continuance	Main Body ECU (Multiplex Network Body ECU)

*1: w/ Auto Wiper System

HINT:

Changes to the customize settings will not be applied until the ignition switch is turned off then ON.